HyperX HX436C17FB3AK2/16 is a kit of two 1G x 64-bit (8GB) DDR4-3600 CL17 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 16GB. Each module has been tested to run at DDR4-3600 at a low latency timing of 17-21-21 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.624” (41.24mm), w/heatsink
HyperX Fury RGB 16GB 3600MHz DDR4 Non ECC RAM DIMM-HX436C17FB3AK2/16
Lifetime Manufacturer Warranty
SKU HX436C17FB3AK2/16 EAN/UPC Code 740617302622 Brand HyperX Memory Capacity 16GB Kit (8GB x2) Module Quantity 2 Module Speed 3600MHz (PC4-28800) Error Check Non-ECC Model/Series/Type HyperX HyperX Range/Series Fury Module Type DIMM CAS Latency CL16 Form Factor DDR4